Kodak Smart Home

Baby Monitor App Setup & Camera Connection Guide

Android Only — Not available on iOS
Part 1

Download & Install

⚠️ Not on Google Play. The Kodak Smart Home app must be downloaded via Aptoide, a trusted third-party app store. Choose either method below — they both get you to the same place.

Direct Download Link

Scan the QR code with your Android phone, or tap the button below to open the Kodak Smart Home page on Aptoide.

Open Aptoide Page →
  1. 1
    Open your phone's browser (Chrome, Samsung Internet, etc.) and scan the QR code above or visit the link.
  2. 2
    Tap the Download button on the page.
  3. 3
    If your phone prompts you to install Aptoide, accept and tap Download Aptoide App Store.
  4. 4
    Once the APK file downloads:

    Open your Downloads folder.

    Tap the file (usually named aptoide.apk).

    If prompted, allow "Install from Unknown Sources."

  5. 5
    Open the Aptoide app once installed.
  6. 6
    Inside Aptoide, search for Kodak Smart Home (it may open automatically).
  7. 7
    Tap Download → Install and wait for it to complete.
  8. 8
    Find the Kodak Smart Home app on your home screen or app drawer — you're ready for Part 2!

Aptoide Main Site

Scan to go to the Aptoide homepage, then use the search bar inside the app.

Open Aptoide →
  1. 1
    Scan the QR code above or go to en.aptoide.com in your browser.
  2. 2
    In the search bar, type Kodak Smart Home and tap Search.
  3. 3
    From the results, select the version with the green "Trusted" checkmark.
  4. 4
    Tap Download.
  5. 5
    If Aptoide itself needs installing, follow the same APK install steps as Method A above.
  6. 6
    Once installed, open Kodak Smart Home and head to Part 2.
Part 2

Connect to Your Camera

A — Initial Setup
  1. 1
    Open the Kodak Smart Home app on your phone.
  2. 2
    Create a new account or sign in with your existing Kodak credentials.
  3. 3
    On the main screen, tap Add Device or the "+" icon.
B — Power & Camera Preparation
  1. 1
    Plug your Kodak Smart Home camera into a power outlet.
  2. 2
    Wait for the LED to begin flashing blue — this means it's in pairing mode.

    Not flashing? Press and hold the Reset button on the back or bottom for 5–10 seconds until it resets.

C — Connect to Wi-Fi
📶 Use 2.4GHz Wi-Fi only. 5GHz networks may not be detected by the camera.
  1. 1
    In the app, choose Add Camera → Smart Camera (or select your specific model).
  2. 2
    Select your 2.4GHz Wi-Fi network and enter your password carefully.
  3. 3
    A QR code will appear on your phone screen.
  4. 4
    Hold your phone 10–20 cm (4–8 inches) in front of the camera lens so it can scan the code.
  5. 5
    Wait until the camera beeps or its LED turns solid/flashing green — it's successfully scanned.
  6. 6
    The app will connect automatically — this may take 1–2 minutes.
D — Final Steps
  1. 1
    Once connected, you'll see "Camera Added Successfully." 🎉
  2. 2
    Give your camera a name — e.g. Living Room Cam, Front Door, etc.
  3. 3
    Tap Finish or Save.
  4. 4
    You'll now see the live feed from your camera on the app's home screen.
E — Troubleshooting
📡 Camera not connecting?
  • Make sure your phone is on a 2.4GHz Wi-Fi network — not 5GHz.
  • Reset the camera and repeat the QR code scan step from the beginning.
📷 QR code won't scan?
  • Turn up your phone's screen brightness to maximum.
  • Move the phone slightly closer or farther from the lens — try different distances.
🔇 No sound or video?
  • Check that the app has microphone, storage, and camera permissions in your phone's settings.
  • Restart both the app and the camera.